User manual

Save / Recall
Save Waveforms
The Save Waveform function saves trace data to either an internal memory location, or to a trace file. The
source waveform can be any type of trace; a channel, math function, zoom, or even another memory. Use
Recall Waveform to restore these previously saved waveforms to the display.
Note: Only files saved in binary format (.TRC) can be recalled to the touch screen.
By default, trace files are saved to the MicroSD card, although you can choose another location, such as a
USB drive. The file name is autogenerated from the <source trace><trace title><number in sequence>
(e.g., C1test000001).
Choose File > Save Waveform from the menu bar.
Save Waveform To Memory
1. Touch Memory.
2. Choose the Source trace you are saving.
3. Choose the Destination location.
4. Touch Save Now!
Save Waveform To File
1. Touch File.
2. Choose the Source waveform.
3. Optionally, touch Trace Title to change the root file name of your waveforms.
Caution: Numbers placed at the end of this name are truncated because the instrument
appends a sequence number to each file. Place numbers at the beginning, or place an
alpha character after the number (e.g., XYZ32a).
4. Touch Data Format and select a file format:
l Binary, Teledyne LeCroy's binary file format (.trc). Binary results in the smallest possible file
size, and is necessary for recalling waveforms to Teledyne LeCroy instruments.
93