User manual

Save / Recall

The Save/Recall dialog displays a series of shortcut buttons launching the various Save/Recall functions.

You can use these buttons or the tabs to navigate to the other Save/Recall dialogs.

Save Setups

Save Setups allows you to quickly save up-to-six panel settings to internal storage, while Recall Setups

restores them with a touch.

If desired, you can also save panel settings as an .LSS file. a different location, such as a USB drive. You

can recall them from the same.

Choose File > Save Setup... from the menu bar.

Save Setup to Memory

1. Touch one of the Setup data entry controls and enter a name for the memory.

2. Touch the corresponding Save button directly to the left of the Setup field.

The save date/time is displayed above the Setup data entry control.

Save Setup to File

1. In Save Panel to File, touch Browse and navigate to the desired folder (Storage Card or USB Disk).

Tip: If the instrument is networked, you can touch Save Panel to File and enter the full

Windows network address of another location in which to save the file. The instrument

must have access to this directory. If this path remains on the Save Setups dialog when the

oscilloscope is turned off, you will be asked for log on credentials to this directory when the

oscilloscope is rebooted.

2. Enter a File name, or choose a existing file to overwrite. Touch OK.

3. On the Save Setups dialog, touch Save Now!