User manual

Acquisition

Viewing Sequence Segments

When in Sequence sampling mode, you can view individual segments easily using the front panel Zoom

button. A new zoom of the channel trace defaults to Segment 1.

You can view other segments by changing the First and total Num(ber) of segments to be shown on the

Zn dialog. Touch the Zn descriptor box to display the dialog.

Tip: By setting the Num value to 1, you can use the front panel Adjust knob to scroll through each

segment in order.

Channel descriptor boxes indicate the total number of segments acquired in sequence mode. Zoom

descriptor boxes show the segment currently displayed. As with all other zoom traces, the zoomed

segments are highlighted on the source trace.

To view time stamps for each segment:

1. From the Sequence dialog, choose Show Sequence Trigger Times.

From the menu bar, choose Timebase > Acquisition Status, then open Trigger time .

2. Under Show Status For, choose Time.

1. Touch First Selected and choose the first segment to display.

2. Touch Number of Selected and enter the total number of segments to display.