User manual

WaveSurfer 3000/3000z Oscilloscopes Operator's Manual
Digital Group Setup
To set up a digital group:
1. Connect the digital input device to the test device and the instrument.
2. From the menu bar, choose Vertical > Digitaln Setup, or press the front panel Dig button and select
the desired Digitaln tab.
3. On the Digitaln set up dialog, check the boxes for all the lines that comprise the group. Touch the
Right and Left Arrow buttons to switch between digital banks as you make line selections.
Note: Each group can consist of anywhere from one to all of the leads from any digital bank.
It does not matter if the some or all of the lines have been included in other groups.
4. Check View Group to start the display.
5. When you're finished on the Digitaln dialog, open Logic Setup and choose the Logic Family that
applies to each digital bank, or set custom Threshhold values.
34