User manual

WaveSurfer 3000/3000z Oscilloscopes Operator's Manual
Message Bar
At the bottom of the oscilloscope display is a narrow message bar. The current date and time are
displayed at the far right. Status, error, or other messages are also shown at the far left, where "Teledyne
LeCroy" normally appears.
You will see the word "Processing..." highlighted with red at the right of the message bar when the
oscilloscope is processing your last acquisition or calculating.
This will be especially evident when you change an acquisition setting that affects the ADC configuration
while in Normal or Auto trigger mode, such as changing the Vertical Scale, Offset, or Bandwidth. Traces
may briefly disappear from the display while the oscilloscope is processing.
20