User manual

WaveSurfer 3000/3000z Oscilloscopes Operator's Manual

Pre-processing Symbols on Descriptor Boxes

Pre-Processing Type Long Form Short Form

Averaging AVG A

Inversion INV I

Deskew DSQ DQ

Coupling DC50, DC1M, AC1M or GND D50, D1, A1 or G

Bandwidth Limiting BWL B

Other Trace Descriptor Boxes

Similar descriptor boxes appear for math (Fn), zoom (Zn), and memory (Mn) traces. These descriptor

boxes show any Horizontal scaling that differs from the signal timebase. Units will be automatically

adjusted for the type of trace.

Trace Context Menu

Touch the trace to open the trace context menu, a pop-up menu of actions to apply to the trace such as

turn off, apply measurement, or label.

Timebase and Trigger Descriptor Boxes

The Timebase descriptor box shows: (clockwise from top right) Horizontal Delay, Time/div, Sample Rate,

Number of Samples, and Sampling Mode (blank when in Real-time mode).

Trigger descriptor box shows: (clockwise from top right) Trigger Source and Coupling, Trigger Level (V),

Slope/Polarity, Trigger Type, Trigger Mode.

Horizontal (time) cursor readout, including the time between cursors and the frequency, is shown beneath

the TimeBase and Trigger descriptor boxes. See the Cursors section for more information.