User manual

WaveSurfer 3000/3000z Oscilloscopes Operator's Manual
If an action can be “undone”, the Undo button restores the oscilloscope to the prior state.
Grid Area
The grid area displays the waveform traces. Every grid is 8 Vertical divisions representing the full number
of Vertical levels possible at the current resolution and 10 Horizontal divisions each representing
acquisition time. The value represented by Vertical and Horizontal divisions depends on the Vertical and
Horizontal scale of the traces that appear on the grid.
The grid area can be divided up to three times to show channel (Cn), math (Fn), and zoom (Zn) traces on
different grids. In Auto Grid mode, it will divide automatically as needed when new types of traces are
turned on. Two additional grid styles allow you to display XY traces, as well as voltage-time traces.
Regardless of the number and orientation of grids, every grid always represents the same number of
Vertical levels. Therefore, absolute Vertical measurement precision is maintained.
Different types of traces opening in a separate grids.
Grid Intensity
You can adjust the brightness of the grid lines by going to Display > Display Setup and entering a new Grid
Intensity percentage. The higher the number, the brighter and bolder the grid lines.
16