User manual

WaveSurfer 3000/3000z Oscilloscopes Operator's Manual
Micro SD Card
The Micro SD Card acts as the oscilloscope's removable hard drive. Use it to store and easily share setup
files, waveform trace files, LabNotebooks, and other user data.
To remove the card, push in and release. The card should partially pop out, at which point it can be pulled
out fully.
To replace the card, push it into the slot until you hear it click.
Note: When using the oscilloscope Disk Utilities, the Micro SD card is labeled Storage Card, while a
connected USB drive is labeled USB Disk.
10