User manual

WaveSurfer 3000/3000z Oscilloscopes Operator's Manual
WaveSurfer 3000 Firmware Update
Teledyne LeCroy frequently releases free firmware updates for X-Stream model oscilloscopes containing
new product features and bug fixes. The X-Stream installer updates multiple components including the
oscilloscope application, required DLLs, drivers, and low-level microcode for integrated circuits on the
oscilloscope.
The firmware update procedure does not modify or delete any user data (setups, waveforms, screen
captures, calibration constants, etc.) stored on the MicroSD card.
1. Visit our download page at teledynelecroy.com/support/softwaredownload and click the link to
Oscilloscope Downloads > Firmware Upgrades.
2. Select your oscilloscope series and model number.
3. Enter your registration login information, or create a new account.
4. Click the download link, and choose to Save the installer to a USB storage device.
5. Insert the USB device into one of the ports on the front of the oscilloscope.
6. Go to Utilities > Utilities Setup and choose Update Firmware.
7. Browse to the installer file in the USB Disk folder, then click Upgrade.
8. When installation is complete, choose Reboot Now.
Caution: The installation may take several minutes, depending on the length of time since your last
upgrade. Do not power down the oscilloscope at any point during the installation process.
120