Manualshelf

User manual

ManualsBrandsTELEDYNE LECROY ManualsLaboratory Test EquipmentDigital 350 MHz 2 GSa/s 10 Mpts 8 Bit Digital storage (DSO)
121122123124125126127128129130
WaveSurfer 3000/3000z Oscilloscopes Operator's Manual
Set Up DVM
1. From the menu bar, choose Utilities > DVM.
2. Mark Enable to turn on the DVM function.
3. Touch Source and select the input channel to be measured.
4. Touch Mode and choose the waveform parameter to display on the readout. Options are:
l DC
l DC RMS
l AC RMS
l Frequency
5. Optionally, turn on AutoRange, which automatically adjusts the Vertical range and offset of the
waveform as the amplitude changes so that measurements are always taken at the optimal
resolution.When this option is selected, the letter A appears on the DVM descriptor readout.
118