User manual

WaveSurfer 3000/3000z Oscilloscopes Operator's Manual
Date/Time
Date/Time settings control the instrument's timestamp. These numbers appear in the message bar and
on tables/records internal to the oscilloscope application, such as History Mode and WaveScan.
To access the Date/Time dialog, choose Utilities > Utilities Setup from the menu bar, then touch the
Date/Time tab.
Manual Method
Enter the Hour, Minute, Second, Day, Month, and Year, then touch the Validate Changes button.
Internet Method
This method uses the Simple Network Time Protocol (SNTP) to read the time from time-a.nist.gov. The
instrument must be connected to an internet access device through a LAN (Ethernet) port.
If your connection is active, touch the Set from Internet button.
Time Zone
Select a Time Zone.
Check Auto Daylight Savings Time to automatically reset the timestamp when daylight savings occurs in
the selected time zone.
106