User manual

Utilities

Utilities settings primarily control the instrument's interaction with other devices/systems.

Preferences settings, on the other hand, tend to control the appearance and performance of the

oscilloscope application. Use these settings to personalize the behavior of the instrument.

Disk Utilities enable you to perform commonplace Windows file functions.

Utilities Dialogs

To access the Utilities dialogs, choose Utilities > Utilities Setup... from the menu bar.

Hardcopy Setup, Date/Time Setup and System Status buttons open their corresponding dialogs.

There are also tabs linking to Remote Control, Aux Output, and Options settings.

Update Firmware opens a dialog for installing the X-Stream application firmware.

The Service button to the far right of the dialog launches a section of the application reserved for qualified

Teledyne LeCroy service personnel. An access code is required to enter this section.

Status

The Utilities Status dialog displays information about your instrument including model number, serial

number, firmware version, and installed hardware and software options.

Choose Utilities > Utilities Setup from the menu bar, then touch the Status tab.

Choose Support > About from the menu bar.

101