User manual

Save / Recall
Auto Save
Data that appears on the oscilloscope display—such as waveforms, measurement readouts and decoder
data—can be very dynamic and difficult to read from the oscilloscope unless you stop the acquisition.
The Auto Save enables you to automatically store waveform and table data to a file that can be recalled to
the oscilloscope later or saved permanently to external storage.
To automatically save data to a file after each new trigger, choose an Auto Save option on the Save
Waveform and Save Table dialogs: Wrap (old files overwritten) or Fill (no files overwritten).
Caution: If you have frequent triggers, it is possible you will eventually run out of storage space.
Choose Wrap only if you're not concerned about files persisting on the instrument. If you choose Fill, plan
to periodically delete or move files off the instrument.
By default, waveform files and table data are stored on the MicroSD Card.
97