User manual

Save / Recall
Recall Waveforms
Use Recall Waveform to restore previously saved waveform files to the display.
Note: Only files saved in binary format (.TRC) can be recalled to the touch screen.
Choose File > Recall Waveform from the menu bar.
Recall Waveform From Memory
1. Touch Memory.
2. Touch Source and choose a memory location from the Select Source pop-up.
3. Touch Destination and select a location into which to open the recalled memory.
4. Mark Show on Recall to display the trace on the grid.
5. Touch Recall Now!
Recall Waveform From File
1. Touch File.
2. Touch Recall files from directory and enter the path to the waveform folder, or touch Browse and
navigate to the folder.
3. Use the Up /Down Arrows to cycle through the available files until the desired file is selected.
Optionally, touch Show only files to apply a search filter (channels, math functions, or memory) to
the list of available files.
Note: The filter only applies to the files that will appear in the "Next File Will Be Recalled
From..." list. It does not impact the Browse function.
4. Mark Show on Recall to display the trace on the grid.
5. Touch Recall Now!
95