User manual

WaveSurfer 3000z Getting Started Guide
33
MAINTENANCE
Firmware Updates
Free firmware updates are available periodically from the Teledyne LeCroy
website at teledynelecroy.com/support/softwaredownload. Registered
users will receive email notification when a new update is released. To
download and install the update:
1. From a remote PC, visit our download page and click the link to
Oscilloscope Downloads > Firmware Upgrades.
2. Select your oscilloscope series and model number.
3. Enter your registration login information, or create a new account.
4. Click the download link, and choose to Save the installer to a USB
storage device.
5. Insert the USB device into one of the ports on the front of the
oscilloscope.
6. Go to Utilities > Utilities Setup.
7. On the Utilities dialog, choose Update Firmware.
8. Browse to the installer file in the USB Disk folder, then select
Upgrade.
9. When installation is complete, reboot the instrument.
CAUTION. The installation may take several minutes, depending on
the length of time since your last update. Do not power down the
oscilloscope at any point during the installation process.
Language Selection
To change the language that appears on the oscilloscope touch screen, from
the menu bar, choose Utilities > Preference Setup > Preferences and make
your Language selection.
You can also make this selection at power on by touching the Talk icon when
it appears at the upper-right of the touch screen.
Reboot the oscilloscope after changing language.
Activating Software Options
To purchase an option (p.35), contact your Teledyne LeCroy sales
representative. You will receive a license key via email that activates the
optional features on the oscilloscope. To install the key on the oscilloscope:
1. From the menu bar, choose Utilities > Utilities Setup > Options.
2. Touch Add Key.
3. Enter the new license key and click OK.
4. Reboot the instrument.