User manual

WaveSurfer 3000z Getting Started Guide
31
Setup, Waveform and Table Data
The current oscilloscope configuration can be saved to internal setup
panels or setup (.LSS) files and later recalled.
Waveform data can be stored to trace (.TRC) files and later recalled into
memories to restore the waveform display to the screen.
Table data can be saved to either ASCII (.TXT) or Excel (.CSV) files.
When multiple waveforms or tables are displayed, one command saves
All Displayed to separate autonamed files.
Screen Captures
The front panel Print button captures an image of the
screen, which will then be handled according to your
chosen Print method (sent to a printer, saved to an image
file, etc.). Before printing or saving the capture, use the
drawing tools to annotate the image, same as with
LabNotebooks.
File Sharing
If the oscilloscope is networked, LabNotebooks, reports, and other
user data files can be emailed directly from the instrument or saved to
accessible network devices.The oscilloscope can be added to a LAN via
TCP/IP or directly connected to a PC via USBTMC.
Files can also be transferred to a USB drive through any of the host USB
ports. Stored user data files are located on the D: drive.
Saving and Sharing Data
Use the oscilloscope File menu options to save and recall data. See the
WaveSurfer 3000z Oscilloscopes Operator’s Manual for more information on
using these features.
LabNotebooks
LabNotebooks store setups, waveform data, and screen image as they
were at the moment of capture. Creating a LabNotebook can be as simple
as pressing the Print button as you work, saving the LabNotebook to the
MicroSD card. Flashback LabNotebooks to restore the oscilloscope to the
exact state it was in when the file was saved. Waveforms and tables are
displayed as they were for new analyses to be performed.
LabNotebook files can be edited, annotated and exported into a
preformatted HTML, .RTF, or .PDF report.
BASICS