User manual

WaveSurfer 3000z Getting Started Guide
15
Adjusting Setups
On trace setup dialogs, many entries can be made by selecting from the pop-
up menu that appears when you touch a control.
On some pop-up menus, you can choose to display
options as a list or as icons.
When an entry field appears highlighted in blue after
touching, it is active and the value can be modified by
turning the front panel knobs. Fields that don’t have
a dedicated knob (as do Vertical Level or Horizontal
Delay) can be modified using the Adjust knob.
If you have a keyboard installed, you can type
entries in an active data entry field. Or, you can
touch again, then “type” the entry by touching
keys on the virtual keypad or keyboard.
To use the virtual keypad, touch the soft keys
exactly as you would a calculator. When you
touch OK, the calculated value is entered in the
field.
BASICS
Just as you change the display by using the setup dialogs, you can
change the setups by moving different display objects.
Touch-and-drag waveforms, cursors and trigger indicators to reposition them
on the grid; this is the same as setting the values on the dialog.
Quickly create new zoom traces by touching and dragging to draw a
selection box around a portion of the original trace.
Touch & Drag