User manual

Part 2: Automation Programming Reference
Note: It is best to use the IP Address, not the DNS or UNC name. If the oscilloscope application is
not running, initiating the connection from XStreamBrowser will start it; however, it will not power
on a device that is powered off. Be sure the device is turned on before connecting.
When the connection to a device is established, the XStreamBrowser window is populated with the
oscilloscope application object hierarchy.
Root application object hierarchy of XStreamDSO, the "engine" of MAUI oscilloscopes.
Refreshing the Display
If you change the state of the oscilloscope in any way while connected to XStreamBrowser, select the
icon to refresh the object hierarchy. While settings you "push" from XStreamBrowser will appear
immediately, settings changed elsewhere must be "pulled" into the XStreamBrowser browser display.
Disconnecting
Only one connection may be made at one time. To disconnect from the device, choose
File > Close Session.
Use the window closebox or choose File > Exit to close the XStreamBrowser application.
2-5