User manual

MAUI Oscilloscopes Remote Control and Automation Manual
DD_SIGNAL_INPUT, DDSI
Description
Sends or reads out the association of a source with a particular Disk Drive signal. This signal can be used
by disk drive triggers, servo analysis, analog compare, and channel emulation.
Command Syntax
DD_SIGNAL_INPUT <signal_name>,<source>[,<polarity>]
<signal_name>:= {HEAD, READ_GATE, READ_CLOCK, INDEX, SERVO_GATE,
SECTOR_PULSE, PES, ON_TRACK, WRITE_GATE}
<source>:= {None, C1 to Cn, EX, M1 to Mn}
<polarity>:= {POS, NEG}
HEAD and PES have no polarity.
EX source is not valid for HEAD, READ_GATE or READ_CLOCK signals.
M1 through Mn not valid for SERVO_GATE, SECTOR_PULSE, PES, ON_TRACK or WRITE_GATE.
Query Syntax
DD_SIGNAL_INPUT?
Response Format
DD_SIGNAL_INPUT <signal_name>,<source>[,<polarity>]
Related Commands
DD_HEADSIGNAL_CHANNEL, DD_READGATE_CHANNEL, DD_READCLOCK_CHANNEL,
DD_READ_GATE_POLARITY
6-194