User manual

Assembly Instructions
WaveSurfer 3000/3000z Rackmount Accessory
Thank you for purchasing a Teledyne LeCroy WaveSurfer 3000/3000z Rackmount accessory. Please review
these instructions before installing the rackmount.
Parts
The rackmount kit is shipped with the following parts. Contact us if parts are missing.
Parts QTY
Front plate with attached handles 1
Base plate 1
Side plates with pre-installed positioning brackets 2
M4x10 pan-head Phillips screws 10
M4x6 pan-head Phillips screws 6
NOTE: The kit does not include the fasteners needed to attach the rackmount to your equipment rack.
Consult your rack manufacturer regarding the appropriate type, size, and number of fasteners required to
install the rackmount securely.
Tools
You will need a Phillips screwdriver to attach the rackmount to the WaveSurfer.
Installed Dimensions
Weight:
Height:
Width at front plate:
Width behind front plate:
Depth with handles:
Depth without handles:
Rack Us required:
18.8 lbs.
300 mm
480 mm
430 mm
265 mm
205 mm
7U
929323-00 Rev A April, 2018

Summary of content (4 pages)