User Manual

Teledyne LeCroy
Sequence Mode in WaveSurfer 3000 Oscilloscopes
page | 3 of 4
Figure 3: Tapping the Show Sequence Trigger Times button opens the Trigger Times dialog box
The first column under the Time section is the segment number, followed by an absolute time stamp (1s
resolution). The third column shows the time since Segment #1 and the fourth shows the time between segments.
Each segment can be viewed individually or as groups of segments by pushing the front-panel Zoom button or by
using the touch screen (Figure 4). The horizontal delay knob then permits scrolling through the segments.
Figure 4: Multiple segments can be zoomed for comparison purposes.