User manual

WaveSurfer 3000 Oscilloscopes

5. If the operator you've selected has any other configurable settings, you'll see a right-hand dialog of the

same name as the operator. Touch the tab to open the dialog and make any further settings. These are

explained on the dialog.

There will also be a Zoom dialog where you can optionally adjust the math trace. This does not affect the

scale of any other traces.

Enable/Disable Math Function

Once a math function has been created and saved, just use the main Math dialog to quickly enable/disable

it.

Touch the front panel Math button, or from the menu bar, choose Math > Math Setup, then check the On box

next to each function you wish to display.

Touch Reset All to erase all functions from their locations.

Touch Clear Sweeps to restart the counter on cumulative functions (like Average).

Adjust Memory or Math Traces

Unlike channel traces, the scale of memory (M1 - M2) or math function (F1 - F2) traces can be adjusted

directly without having to create a separate zoom trace. The same set of zoom factor controls used for zoom

traces appear on the Zoom right-hand dialog, or on one of the trace setup dialogs. This applies to any trace

that is created as a math function (Fx) trace, including traces generated through analysis options and

graphs.