User manual

Operator's Manual
Internet Method
This method uses the Simple Network Time Protocol (SNTP) to read the time from time-a.nist.gov. The
oscilloscope must be connected to an internet access device through the LAN (Ethernet) port on your
instrument's I/O panel. .
If your connection is active, touch the Set from Internet button.
Time Zone
Select a Time Zone.
Check Auto Daylight Savings Time to automatically reset the timestamp when daylight savings occurs in the
selected time zone.
Options
The Options dialog is used to add or remove software options. This dialog also displays the ScopeID and
Serial #. See Adding an Option Key for instructions on using this dialog.
Preferences Settings
Preference settings have mostly to do with the appearance and performance of the oscilloscope itself, rather
than the oscilloscope's interaction with other devices/systems.
Access the Preferences dialog by choosing Utilities > Preference Setup... from the menu bar.
Audible Feedback controls the instrument's audio output. Select this box to hear a beep each time you touch
a screen or front panel control.
Language sets the language used on the display.
There are also tabs linking toCalibration, Acquisition, E-Mail, and Miscellaneous settings.
93