User manual

WaveSurfer 3000 Oscilloscopes

5. On the Ethernet Driver Settings dialog, choose Specify an IP Address.

If assigning a Name server, leave Obtain an IP address via DHCP.

6. Touch the IP Address field, and use the keyboard to enter the address. Repeat for Subnet Mask and

Default Gateway.

Alternatively, touch the Name Server tab and enter the DNS server address.

7. Touch the window close boxes to return to the oscilloscope application.

Enter Network ID

The network file sharing capabilities require that the oscilloscope have access to the network domain and

shares. Use the Network ID settings to enter network credentails. Once credentials have been saved, the

oscilloscope should connect to the network seamlessly; you do not need to re-enter credentials unless you

wish to change them.

NOTE:These may be the credentials of any valid domain user (e.g., your own logon); they do not have to be

unique to the oscilloscope. Consult with your Network Administrator.

1. Connect a keyboard to the front panel USB port.

2. From the menu bar, choose Utilities > Utilities Setup, then touch the Remote tab.

3. On the Remote dialog, touch Network ID.

4. On the Owner Properties dialog, enter the network User Name, Password, and Domain Name.

5. Reboot the oscilloscope after entering or changing the Network ID.