Data Sheet

USBProtocolSuiteUserManual 579
ScriptEditor TeledyneLeCroyCorporation
12.10.9 Outlining
IfyouenableoutliningattheOptionsbutton,youcancollapseorexpandcodeblocks.
YoucantoggleoutliningattheOptionsbuttonorbyright‐clickingacommandtodisplaya
menufromwhichyoucanchooseToggleOutlining.
12.10.10 Line Numbers
IfyouenablelinenumbersattheOptionsbutton,eachlinehasalinenumber.
12.10.11 Tooltips
IfyoushowtooltipsattheOptionsbutton,tooltipsappearwhenyouplacethecursor
overabuttonorcommand.
12.10.12 Text Snippets
TextsnippetsappearintheTextSnippetswindow(seeFigure 12.3onpage 580.)Youcan
draganddropatextsnippetintothescript.Theavailabletextsnippetsare:
 Send:Enterapackettemplatename,withoptionstodelayoroverride.
 SendPipeCommand:Enteracommandname,pipetype,totallength,setup,
data pattern,asn,store data,andsenderdy.
 SetSequenceNumber:Enterapipetype,deviceaddress,endpointnumber,
data directory,sequencenumber,andenable.
 SendFile:Enterafilepath,deviceaddress,endpoint,delay,
start sequence number,payload_size,streamID,androutestring.
 PrepareWaitPkt:EnterpackettypeasTPorDP,requestedpacketsubtypeforTP, 
packetendpointnumber,packetdeviceaddress,packetdirection,and
packet streamID.
 WaitPacket:Enterpacketstowait(defaultis1)andstartwaitatlastend
(default is 1)ornot(0).
 TxSleep:Enteraninterval.
 SetLinkState:Enteralinkstate.
 Loop:Enteracounter.
 StartRecording:EntertheRecordedOptionsFilePathandNameandtheTrace
FilePathandName.Indicatewhethertokeeptheoldtrace.
 StopRecording:Enter0 (no WaitForUpload)or1 (WaitForUpload).Youcanalso
forcetostoprecording.
 TriggerAnalyzer:Hasnooptions.
 for:Entercodebetweenthebraces.
 Call:EnteraProcedurenameandtheprocedureparameters.
 PacketSize:Enteranintegeroratemplate.
 PatternSize:Enteranintegeroradatapattern.
 FieldSize:Enteranintegerorafieldname.
 Set:Afterthesetcommand,enterasettinganditsvalue.
 Trace_B:Enteramessage.
 Trace:Enteramessage.
 StartDeviceFrameworkHandler:StartsorstopstheDeviceFrameworkHandler