Data Sheet

USBProtocolSuiteUserManual 291
UsingSequences TeledyneLeCroyCorporation
5.9 Using Sequences
5.9.1 Using a Single-State Sequence
Asdescribedpreviously,asequencecanbesingle‐stateormulti‐state.Asingle‐state
sequenceisasimplecombinationofeventsandactions.Youcannotcreateloopingor
branchingconditionswiththistypeofsequence.
Amulti‐statesequenceallowsyoutobranchsuccessivelyto(advanceto)lowerstatesin
thesequenceortolooptothefrontofthesequence(restartthesequence).
5.9.2 Using a Multi-State Sequence
Multi‐statesequencesallowyoutocreateconditionsthatbranchdowntosuccessive
statesorloopbacktothebeginningofthesequence.Theyaremorecomplexthansingle‐
statesequencesbutverypowerful.
5.9.3 Using Independent Sequences (USB 2.0 only)
Youcanuseuptoeightindependentsequences.Bydefault,theyarelabeledSequence0
throughSequence7.
Thesequencesoperateinparallelandhavenoeffectoneachotherwiththefollowing
exception:
 AnyofthesequencescancontaintheactionRestartAll.Thisactionrestartsall
sequencesintheMainDisplayarea.
5.10 Recording Rules - USB 3.1 SS+ (Voyager M310/M310C only),
USB 3.1 SS (Voyager/Advisor T3 only)
Note:USB3.1:Onlyonesequenceissupported.
Note:UsetheRecordingRulestosettriggersforUSB3.1.