Data Sheet

USBProtocolSuiteUserManual 29
VoyagerM310PAnalyzer TeledyneLeCroyCorporation
1.2.4 Traffic Generation
USB2.0and3.1trafficgenerationoptionsallowyoutotransmitcustompacketsover
standardUSBcableswithlow‐levelcontrolofheaders,payloads,timing,andlinkstates.
USB 2.0 Trainer
TheUSB2.0Trainercanplaybacktracefilesbit‐for‐bit,allowingvalidationengineersto
recreateproblemsreportedinthefieldortest‐specificfunctionality.
Tobuild2.0generationscriptfiles,youcaneditexampletestscenariosorexportany
trafficstreamfromapreviouslyrecordedtrace.The2.0Trainerincludesa
Generation ScriptEditor.
Ascriptpre‐processorallowsyoutoorganizescriptcodeandcreatereusablegeneration
blocks.
TheVoyagerUSB2.0Trainercantransmitlow,full,orhigh‐speedtrafficandsupportsboth
hostanddeviceemulation.ItisbackwardcompatiblewithexistingUSBTrainer
traffic generationscripts.
ForUSB2.0applications,theTrainersupportsbothbitstreammodeorIntelliframemode.
InIntelliframemode,theTrainercanwaitfortheappropriateresponsefromtheDUT
beforetransmittingthenextpacket.Forexample,afterissuinganIN,thegeneratorwaits
fortheDATAxpacketreturnedbythedevicetofinish,andthenissuesanACK.WhenNAKs
arereceived,theTrainercanautomaticallyresendthepreviouspacket.
USB 3.1 Exerciser ReadyLink™ Emulation
TheTeledyneLeCroyVoyagerUSB3.1ExerciserfeaturesReadyLinkEmulationMode.The
ReadyLinkfeaturehandlesallUSB3.1linktrainingandlinkflowcontrol,allowingthe
emulatortooperateatfulllinerateandrespondtotheDUTasdefinedbythe
specification.TheReadyLinkEmulationModehelpssimplifydevelopmentofUSB 3.1test
scenarios.
Bydefault,ReadyLinkEmulationModeautomaticallymanages:
 HeaderPacketAcknowledgments(L_GOOD_n)
 BufferCredit(L_CRD_x)
 SKIPsatrequiredintervals(SKP)
 LinkSynchronization
 RespondstoLFPS(Polling.LFPS)
 Respondstopollingsequence(Polling.RxEQ)
 RespondstoTS1/TS2handshakingsequence
 RespondstoSS.Inactive(withRX.Detect)
 Respondsto3.1SS+LPBMandSCD1andSCD2LFPSmessages
 PowerManagementLinkCommands
 RespondstoLGO_Un(withLAU)
 RespondstoLAU(withLMPA)