Data Sheet

TeledyneLeCroyCorporation ApplicationStartup
150 USBProtocolSuiteUserManual
3. TochangetoStaticIP,clicktheStaticIPradiobutton.
 EntertheIPAddress.
 EntertheSubnetMask.
 EntertheDefaultGateway.
Figure 3.43: Device IP Settings Dialog
ClickApplytogetasuccessmessageandreturntotheAnalyzer Devicesdialog.
Note:YoucanletthesystemSuggeststaticIPsettings(IPaddressandsubnet mask).
4. ClickClosetoclosethedialogandusethedevicewithaStaticIPaddress.
3.5.4 USB 3.1 Device/Host Signal Parameters (Voyager M3, M3i, M3x, M310,
M310C, and Advisor T3)
ForUSB,toadd,remove,edit,load(fromacomma‐delimited.csvfile),orsave(asa
comma‐delimited.csvfile)USB3.1devicesandtocalibrateUSB3.1connections,select
Setup>USB3.1Device/HostSignalParameterstodisplaytheUSB3.1Device‐>Analyzer
‐>HostSignalProfilesdialog.