Data Sheet

USBProtocolSuiteUserManual 103
Chapter 3
Installation
TheUSBProtocolSuiteAnalyzersoftwareinstallsontoaMicrosoft
®
Window
®
host
machine

usingtheWindowsServer2008R2,WindowsServer2012,Windows 7,
Windows 8/8.1andWindows10operatingsystems.
Important:PleaseuninstallanyversionsofUSBTracer,USBAdvisor,orUSBMobileHS
softwareonyourhostmachineBEFOREinstallingUSBProtocolSuite.Theoldersoftware
isnotcompatiblewiththenewsoftwareanddevicedrivers.Youcanloadfilesrecorded
usingtheoldsoftwareintoUSBProtocolSuite,whichwillautomaticallyconvertthemto
thenewformat.
Note:FilesrecordedwithaUSBChiefUSB1.1analyzerarenolongersupportedandcannotbe
convertedintoUSBProtocolSuitefiles.
3.1 Installing the Analyzer Software on the Host Machine
Note:YoumustinstallthesoftwarebeforeconnectingtheAnalyzertothehostmachineforthefirst
time.
InstallthesoftwareonthehostmachineadministeringtheAnalyzer:
1. InserttheInstallationDVD‐ROMintotheDVDdriveonthehostmachine.
2. Theinstallationautomaticallystartssetup,unlessAutoRunisoff.Inthatcase,select
theDVD‐ROMfrom“MyComputer”andclickSetup.
3. Afterthewarningtocloseallotherprogramsandbeforestartingtheinstallation,the
Installcomponentselectionopens.
4. Selectcomponentsforinstallation.
5. ClickNexttocompletetheinstallation.