Data Sheet

USBProtocolSuiteUserManual 139
SettingUptheAnalyzer‐EthernetConnection TeledyneLeCroyCorporation
5. NowselecttheIPSettingstabtoconfiguretheanalyzerwithanappropriateIP
address(seeFigure 3.36below).Inthiscasewe’veusedthesamesubnetsettings
asourhostPCbutsettheLSBsoftheIPAddressto“20”sothattheanalyzerwon’t
interferewithourhostPC(thathasanIPaddressof192.168.1.15).See
Figure 3.33onpage 137forreference.
Figure 3.36: Setting Static IP Address for Analyzer
6. ClickApplyandawindowwillpopuptellingyouthatthenewIPSettingshave
beenapplied.SeeFigure 3.37.
Figure 3.37: New IP Settings Have Been Applied