Data Sheet

USBProtocolSuiteUserManual 137
SettingUptheAnalyzer‐EthernetConnection TeledyneLeCroyCorporation
Figure 3.33: Command Prompt Window: ipconfig
Setting a Static IP Address on your USB Analyzer
1. ConnectyourPCtotheAnalyzerwithaUSBcable.
2. Nowpoweronyouranalyzer(withtheUSBcableattached).
3. Aftertheanalyzerhasinitialized,StarttheUSBProtocolSuitesoftwareandselect
“Setup‐>AllConnectedDevices”.SeeFigure 3.34onpage 138.
StaticIP
Address