Data Sheet

TeledyneLeCroyCorporation FormatofTrafficGenerationFiles
564 USBProtocolSuiteUserManual
e 0or1 HostGenerationOnly.
Assignavalueforthee(HighSpeedSPLITEnd)
field.
et 0to3 HostGenerationOnly.
Assignavaluefortheet(HighSpeedSPLIT
EndpointType)field:
0=Control
1=Isoch
2=bulk
3=Interrupt
hird 4bits(0‐15) HostGenerationOnly.
AssigntheHostInitiatedResumeDuration.
Default valueis0.Foradescriptionofthe
values1 through15,seethe
Link Power ManagementSpecification.
link_state 4bits(0‐15) HostGenerationOnly.
Assignthelinkstate.Currently,theonlylegal
link_statevalueis1,forL1(Sleep).
Default valueis0,sosetthelink_statevalueto
1.
remote_wake 0or1 HostGenerationOnly.
DisableorenableRemoteWakeup.Default
valueis 0,whichdisablesRemoteWakeup.To
enableRemoteWakeup,setthevalueto1.
eop positive
integer
Assignapositiveintegerforthelengthofthe
endofpacket(EOP).
Thedefaultvalueisthecorrectlength
(2bitsofSE0,1bitofJ).
Thevalueisreflectedby<val‐1>bitsofSE0plus
onebitofJ.
hi_eop (ABCD)Hex UsedtogenerateahighspeedEOPpattern.
Thebytesareintheordertheycomeacrossthe
bus,andthebitswithinthebytesareinLSBto
MSBorder.
Maximumnumberofbytesallowedis13.
TABLE 11.3: Support Keys for Defining Fields within a packet. (Continued)
Key Code Format Description