Data Sheet

TeledyneLeCroyCorporation SwitchtoTransferView
350 USBProtocolSuiteUserManual
6.15 Switch to Transfer View
ATransferisdefinedintheUSBspecificationasoneormoretransactionsbetweena
softwareclientanditsfunction.USBtransferscanbeoneoffourkinds:Control,
Interrupt,Bulk,andIsochronous.Thesystemcandisplayallfourtypes.
ThedefaultdisplaymodeisPacketView.Beforeyoucanviewdecodedtransfers,you
mustswitchfromPacketView(orTransactionView)toTransferView.
ToselectTransferView:
1. Click onthetoolbar.
TheTraceViewscreenisre‐drawntodisplayTransfers.
Note:SelectingTransferLeveladdsachecknexttothismenuitem.IfyouwanttoreturntoPacket
View,openthemenuandreselectTransfer Level.Thisactionremovesthecheckandreturns
thedisplaytoPacket View.
YoucanalsoswitchtoTransferViewfromtheMenuBar:
1. SelectDisplayOptionsunderSetuptodisplaytheDisplayOptionsGeneralwindow:
2. CheckTransfer.
3. ClickOK.
6.16 View Decoded Transfers
AfteryousetDisplayOptions,theTraceViewscreenisre‐drawntodisplaydecoded
transfersinthecolorsandformatyouselected.
Figure 6.50: Decoded Transfers