Data Sheet

TeledyneLeCroyCorporation StatusBar
192 USBProtocolSuiteUserManual
Whenthedataissaved,theRecordedDatafileappearsinthemaindisplaywindow,and
theRecordingStatuswindowclears.
 IftherecordingresultedfromaTriggerEvent,thefirstpacketfollowingthetrig‐
ger(orthepacketthatcausedthetrigger)isinitiallypositionedsecondfromthe
topofthedisplay.
 IftherecordingdidnotresultfromaTriggerEvent,thedisplaybeginswiththe
firstpacketinthetrafficfile.
4.6.3 Recording Activity
Duringrecording,asegmentoftheStatusBardisplaysrecordingactivityasaseriesof
verticalbars.
Themoreverticalbarsthatdisplay,thegreatertheamountofactivityrecording.Ifthere
arenoverticalbars,thereisnorecordingactivity.
Duringuploading,thepercentofthecompleteduploaddisplays.
Note:Ifpacketsarefilteredfromtherecording,ordataaretruncated,recordingactivityreduces.
4.6.4 Cable Status
Mercury T2C: Cable Status
TheMercuryT2ChascablestatusLEDsonthefrontpanel.SeeFigure 4.15.
Figure 4.15: Mercury T2C “C” Connectors and LED Status Indicators
The“C”cablecanbeinsertedintoConnectors1or2ontheMercuryT2Cfrontpanel
right‐sideup(correctly)orupsidedown(incorrectly).Iftheyareinsertedincorrectly
(upsidedown)theLEDwillglowRED.Iftheyareinsertedcorrectly(right‐sideup)theLED
willglowGREEN.
Note:Ifthecableisinsertedincorrectly,justunplugit,turnitoverandre‐connectit.
ThestatusoftheLEDsismimickedbytheTeledyneLeCroyUSBProtocolSuitesoftware
display,inthestatusfieldatthebottomofthedisplay.SeeFigure 4.16onpage 193.
Port1
Connector
andStatus
LED
Port2
Connector
andStatus
LED