Data Sheet

TeledyneLeCroyCorporation ApplicationStartup
152 USBProtocolSuiteUserManual
Figure 3.45: USB 3.1 Device Analyzer Host Signal Parameters Profile Dialog Voyager M310, M3,
M3i, Advisor T3.
ThedialogallowsyoutoReadfromAnalyzer.
ThedialogallowsyoutoApplytoAnalyzer.
YoucanenterDevicetoAnalyzerSignalSettings:
 DeviceName
 DeviceCableID
 InputSignalEqualization(ISE)Settings:Short,mediumandlongtimeconstant
(Current,Off,Minimum,Moderate,orMaximum)
 Pre‐EmphasisSettings:Shortandlongtimelevel(0to15)and
shortandlongtimedecay(0to7)
 OutputPowerLevel:Current,or213mVto1294mV
 YoucanenterHosttoAnalyzerSignalSettings:
 HostName
 HostCableID
 InputSignalEqualization(ISE)Settings:Short,mediumandlongtimeconstant
(Current,Off,Minimum,Moderate,orMaximum)
 Pre‐EmphasisSettings:Shortandlongtimelevel(0to15)and
shortandlongtimedecay(0to7)
 OutputPowerLevel:Current,or213mVto1294mV
YoucanalsoLoadthedefaultsettingsorLoadthelastappliedsettings.
InputEqualization