Data Sheet

USBProtocolSuiteUserManual 279
RecordingRules‐USB2.0 TeledyneLeCroyCorporation
ForMobile,thesupportedeventsforUSB2.0are:
 PacketIdentifier
 TokenPattern
 SOFPattern
 DeviceRequest
 DataPattern
 BusCondition
 Errors
 Transaction
 DataLength
 Split
NotesonExternalTriggerIn
InputthresholdvalueforVoyagerandAdvisorT3is0.8V.
InputthresholdvaluesforUSBTracer/Trainerarebetween0.8Vand2V(TTLLevels).
TheminimumvalueoftheexternalinputsignalwhichcanbeinputtoVoyager,
Advisor T3,andUSBTracer/Traineris0V.Themaximumvalueis5V.
Event Properties (of the Error Event)
Figure 5.51: Event Properties Dialog.
ThedialogliststhePropertiesandtheirValues.
Note:ThedefaultvaluesofBabbleclocksandTime‐outorTurnaroundviolationarebasedonthe
recordingspeedselectedinthe2.0Misctab.IftheselectedspeedisAuto‐Detect,thedefaults
arebasedonHiSpeedtraffic,sincethisisthemostprevalentspeedtoday.
IfyouchangetherecordingspeedAFTERyouhavedefinederrorevents,theBabbleclocksand
Time‐outorTurnaroundviolationvaluesareNOTupdated,soyoucangetafalsetriggerora
missederror.