Datasheet

Probe Specifications
Operational Characteristics:
A 4-wire tap allows solder down directly between chi
p
fidelity amplifier is used to increase signal amplitude
t
by the Inter-Chip USB (IC-USB) specification (Referen
1. 0 V
Probe Components:
• Header plug allows connection to the female po
r
• Two flying lead probe sets (6” for IC-USB links;
2
1. 0
V
1.2V
• Solder in resistor probe tips
• Two type “A” USB connections (One USB cabl
e
Temperature and Humidity
The probe will operate in the following temperature r
a
Operating: 0°C to 55°C (31°F to 131°F)
Non-operating: -20°C to 80°C (-4°F to 176°F)
The hardware will operate in the following humidity r
a
10% to 90% RH (non-condensing)
Ordering Information
Product Description: LeCroy Embedded USB Pr
o
Product Part Number: USB-FE02-V01
1-800-909-7211
teledynelecroy.com
©2012 Teledyne LeCroy. All rights reserved. Specifications, prices, availability and del
i
Product or brand names are trademarks or requested trademarks of their respective h
o
p
-to-chip connections on a PCB. For IC-USB links, a high-
t
o valid USB 1.1/2/0 voltages. Supported voltages defined
ce A) include:
1. 5 V
3.0 V
r
tion of probe lead assembly
2
” for high-speed USB 2.0 links)
1. 5 V
3.0
V
1. 8 V
3.3V
(standard USB 1.1/2.0 voltage)
e
for power; one cable for connection to LeCroy analyzer)
a
nge:
a
nge:
o
be
i
very subject to change without notice.
o
lders.
psgusbembeddedds-ds-31oct12
Local sales offices are located throughout the world.
Visit our website to find the most convenient location.