Instructions

T3VNA User Manual 83
No calibration data --- (displayed in gray)
Calibrated Cor (displayed in blue)
Need to re-calibrate C? (displayed in blue)
Note: The calibration status is shown as “C?” which indicates that the scan frequency range is dierent
from the time of calibration. Users need to re-calibrate in the current scan frequency range.
1. Correction
Turn on or off the calibration.
2. Calibrate
Calibrating with the specified mechanical calibration requires three loads: open, short, and match.
Calibration data is saved as user calibration data.
3. Cal kit
Specify the calibration kit used for mechanical calibration.