Instructions

112 T3VNA User Manual
Figure 7-2 LAN
4. Press button on the front panel System→Interface→LAN to enter the LAN Config function menu.
5. Select the IP Config between Static and DHCP
 DHCP: the DHCP server in the current network will assign the network parameters automatically
(IP address, subnet mask, gate way) for the analyzer.
 Static: you can set the IP address, subnet mask, gate way manually. Press Apply.
Figure 7-3 LAN Config
The analyzer will be detected automatically or manually as a new LAN point.
7.1.3 GPIB is not supported on the T3VNA series.