Instructions

T3VNA User Manual 101
Select all the les and folders in the current directory.
5. Cut
Cut the Selected le or folder, and delete the primary one after paste.
6. Copy
Copy the Selected file or folder for paste.
7. Paste
Paste the file cut or copied before into the current.
8. Delete
Delete the selected file or directory.
9. Rename
Rename the selected file or folder.
6.4 Shortcut Key
6.4.1 Preset
Recall the preset setting and restore the analyzer to a specified status.
 Press System ->”Pwr On/Preset” ->”Preset” to select “Def”, “Last” or “User”.
 Press Preset to load the factory settings listed in the following table (except items marked with “**”)
or Last settings or User-defined settings.
 Dierent modes have their own Presets. The following table shows the initial default state of the
Spectrum Analyzer Mode.
Table 6-3 Default Preset of Spectrum Analyzer Mode
Parameter Default
Frequency
Center Freq 750 MHz
Start Freq 0 Hz
Stop Freq 1.5 GHz
Freq Offset 0 Hz
Freq Step Auto, Span /10
Signal Track O
Span
Span 1.5 GHz
X Scale Linear