Instructions

T3VNA Programming Guide 81
Type single SCPI commands. Press Enter to send the command.
To exit the telnet window click X in the upper-right corner.
To get a normal telnet prompt, press Ctrl ] (closing bracket).
To get SCPI prompt again, type open <ip Address> 5024.
Press Enter:
To close the normal telnet window, type Quit and press Enter.
Welcome to the SCPI instrument ‘Teledyne T3VNA1500’
>>
*
IDN?
Teledyne,T3VNA1500,T3V1XEAX2R0030,2.0.1.9
>>
Welcome to Microsoft Telnet Client
Escape Character is ‘CTRL+]’
Microsoft Telnet>
Welcome to Microsoft Telnet Client
Escape Character is ‘CTRL+]’
Microsoft Telnet> open 10.11.11.106 5024
Welcome to Microsoft Telnet Client
Escape Character is ‘CTRL+]’
Microsoft Telnet> open 10.11.11.106 5024
Connecting to 10.11.11.106...
Microsoft Telnet>