Instructions

64 T3VNA Programming Guide
3.9 TG Subsystem
3.9.1 TG On-off (:OUTPut[:STATe])
Command
Format
:OUTPut[:STATe] OFF|ON|0|1
:OUTPut[:STATe]?
Instruction Sets TG on-o.
Gets TG state.
Parameter
Type
Boolean
Parameter
Range
OFF|ON|0|1
Return 0|1
Default 0
Menu TG > TG
Example :OUTPut ON
3.9.2 TG Level
(:SOURce:POWer[:LEVel][:IMMediate][:AMPLitude])
Command
Format
:SOURce:POWer[:LEVel][:IMMediate][:AMPLitude] <value>
:SOURce:POWer[:LEVel][:IMMediate][:AMPLitude]?
Instruction Sets TG level.
Gets TG level.
Parameter
Type
Float, unit: dBm
Parameter
Range
0 dBm ~ -20 dBm
Return Float
Default 0 dBm
Menu TG > TG Level
Example :SOURce:POWer -20
3.9.3 TG Level OSets (:SOURce:CORRection:OFFSet )
Command
Format
:SOURce:CORRection:OFFSet <value>
:SOURce:CORRection:OFFSet?
Instruction Sets TG level offsets.
Gets TG level offsets.
Parameter
Type
Float, unit: dBm
Parameter
Range
200 dBm ~ -200 dBm
Return Float
Default 0 dBm
Menu TG > Lel OffSets
Example :SOURce:CORRection:OFFSet 1
3.9.4 TG Normalize on-o (:CALCulate:NTData[:STATe])
Command
Format
:CALCulate:NTData[:STATe] OFF|ON|0|1
:CALCulate:NTData[:STATe]?