Instructions

T3VNA Programming Guide 61
3.7.4.3 T-power Stop Line ([:SENSe]:TPOWer:RLIMit)
Command
Format
[:SENSe]:TPOWer:RLIMit <time>
[:SENSe]:TPOWer:RLIMit?
Instruction Sets T-power stop line.
Gets T-power stop line.
Parameter
Type
Float, unit: s
Parameter
Range
0 ~ 1000 s
Return Float, time unit: s
Default 20ms
Menu Meas > T-power > Meas Setup > Stop Line
Example :TPOWer:RLIMit 0.02
3.7.4.4 Query T-power (:MEASure:TPOWer?)
Command
Format
:MEASure:TPOWer?
Instruction Query the result of T-power measurement.
Parameter
Type
Float, unit: dBm
Parameter
Range
None
Return Float, unit: dBm
Default None
Menu Meas > T-power
Example :MEASure:TPOWer?
3.7.5 Spectrum Monitor（SPECtrogram）
3.7.5.1 Spectrogram state([:SENSe]:SPECtrogram:STATe)
Command
Format
[:SENSe]:SPECtrogram:STATe RUN|PAUSe
[:SENSe]:SPECtrogram:STATe?
Instruction Sets spectrogram state.
Gets spectrogram state.
Parameter
Type
Enumeration
Parameter
Range
RUN: Start
PAUSe: Pause
Return RUN|PAUSe
Default RUN
Menu Meas > Spectrum Monitor > Meas Setup > Spectrogram
Example :SPECtrogram:STATe PAUSe
3.7.5.2 Spectrogram Restart ([:SENSe]:SPECtrogram:RESTart)
Command
Format
[:SENSe]:SPECtrogram:RESTart
Instruction Restart spectrogram.