Instructions

54 T3VNA Programming Guide
Type
Parameter
Range
OFF|ON|0|1
Return 0|1
Default OFF
Menu Limit > Setup > Fail to stop
Example :CALCulate:LLINe:FAIL:STOP OFF
3.7 Measurement Subsystem
3.7.1 ACPR Subsection
3.7.1.1 Main Channel ([:SENSe]:ACPRatio:BWIDth:INTegration)
Command
Format
[:SENSe]:ACPRatio:BWIDth:INTegration <freq>
[:SENSe]:ACPRatio:BWIDth:INTegration?
Instruction Specifies the range of integration used in calculating the power in the main
channel.
Gets the range of integration used in calculating the power in the main channel.
Parameter
Type
Float, unit: Hz, KHz, MHz, GHz
Parameter
Range
100 Hz~1.5 GHz
Return Float, unit: Hz
Default 1MHz
Menu Meas > ACPR > Meas Setup > Main Channel
Example INSTrument:MEASure ACPR
:ACPRatio:BWIDth:INTegration 20 MHz
3.7.1.2 Adjacent Channel Bandwidth
([:SENSe]:ACPRatio:OFFSet:BWIDth[:INTegration])
Command
Format
[:SENSe]:ACPRatio:OFFSet:BWIDth[:INTegration] <freq>
[:SENSe]:ACPRatio:OFFSet:BWIDth[:INTegration]?
Instruction Specifies the bandwidth used in calculating the power in the adjacent channel.
Gets the bandwidth used in calculating the power in the adjacent channel.
Parameter
Type
Float, unit: Hz, KHz, MHz, GHz
Parameter
Range
100 Hz~1.5 GHz
Return Float, unit: Hz
Default 1MHz
Menu Meas > ACPR > Meas Setup > Adjacent Chn
Example :ACPRatio:OFFSet:BWIDth 20 MHz
3.7.1.3 Channel Space
([:SENSe]:ACPRatio:OFFSet[:FREQuency])
Command [:SENSe]:ACPRatio:OFFSet[:FREQuency] <freq>