Instructions

44 T3VNA Programming Guide
Parameter
Range
None
Return None
Default None
Menu
Marker > △ M→Span
Example :CALCulate:MARKer2:DELTa:SPAN
3.6.1.15 Marker Delta to Center Frequency
(:CALCulate:MARKer[1]|2|3|4|5|6|7|8:DELTa[:SET]:CENTer)
Command
Format
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:DELTa[:SET]:CENTer
Instruction This command sets the center frequency equal to the specified delta marker
frequency.
This command can be only used in DELTa|BAND marker mode, Reference
Command:CALCulate:MARKer[1]|2|3|4|5|6|7|8:MODE
Parameter
Type
None
Parameter
Range
None
Return None
Default None
Menu
Marker > △ M→CF
Example :CALCulate:MARKer3:DELTa:CENTer
3.6.1.16 Peak Search Type
(:CALCulate:MARKer:PEAK:SEARch:MODE)
Command
Format
:CALCulate:MARKer:PEAK:SEARch:MODE MAXimum|MINimum
:CALCulate:MARKer:PEAK:SEARch:MODE?
Instruction This is for the analyzer’s internal peak identification routine to recognize a
signal as a peak.
Parameter
Type
Enumeration
Parameter
Range
MAXimum|MINimum
Return Enumeration
Default MAXimum
Menu Peak > Search Cong > Peak Type
Example :CALCulate:MARKer:PEAK:SEARch:MODE MINimum
3.6.1.17 Peak Threshold (:CALCulate:MARKer:PEAK:THReshold)
Command
Format
:CALCulate:MARKer:PEAK:THReshold <value>
:CALCulate:MARKer:PEAK:THReshold?
Instruction Specifies the minimum signal level for the analyzers internal peak identication
routine to recognize a signal as a peak. This applies to all traces and all
windows.
Gets the minimum signal level for the analyzers internal peak identification
routine to recognize a signal as a peak.
Parameter Float, unit: dBm