Instructions

40 T3VNA Programming Guide
3.6.1.3 Marker Mode (:CALCulate:MARKer[1]|2|3|4|5|6|7|8:MODE)
Command
Format
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:MODE POSition|DELTa|BAND|OFF
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:MODE?
Instruction Selects the type of markers that you want to activate.
Gets the type of markers.
Parameter
Type
Enumeration
Parameter
Range
POSition: selects a normal marker that can be positioned on a trace and from
which trace information will be generated.
DELTa: activates a pair of markers, one of which is xed at the current marker
location. The other marker can then be moved around on the trace. The marker
readout shows the marker value which moves.
BAND: activates a pair of markers, one of which is xed at the current marker
location. The two marker can then be moved around on the trace. The marker
readout shows the difference between the two markers.
OFF: turns the designated marker o. If a marker is not active when the mode
is queried, “off” will be returned.
Return Enumeration
Default OFF
Menu Marker
Example :CALCulate:MARK1:MODE POSition
3.6.1.4 Marker to Trace
(:CALCulate:MARKer[1]|2|3|4|5|6|7|8:TRACe)
Command
Format
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:TRACe 1|2|3|4
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:TRACe?
Instruction This command assigns the specified marker to the designated trace 1, 2, 3 or 4.
Gets the specied marker to which trace.
Parameter
Type
Enumeration
Parameter
Range
MARKer:1|2|3|4|5|6|7|8
TRACe:1|2|3|4
Return Enumeration
Default 1
Menu Marker > Select Trace
Example CALCulate:MARK1:TRAC 1
3.6.1.5 Marker Relative To
(:CALCulate:MARKer[1]|2|3|4|5|6|7|8:RELative:TO)
Command
Format
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:RELative:TO:MARKer 1|2|3|4|5|6|7|8
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:RELative:TO:MARKer?
Instruction Sets marker relative to.
Gets marker relative to.
Parameter
Type
Enumeration
Parameter
Range
1|2|3|4|5|6|7|8
Return Enumeration
Default 1
Menu Marker > Relative To