Instructions

T3VNA Programming Guide 33
3.5.4.5 Video to Resolution Bandwidth Ratio
([:SENSe]:BWIDth:VIDeo:RATio)
Command
Format
[:SENSe]:BWIDth:VIDeo:RATio <number>
[:SENSe]:BWIDth:VIDeo:RATio?
Instruction Specifies the ratio of the video bandwidth to the resolution bandwidth.
Parameter
Type
Discrete, Float
Parameter
Range
0.001, 0.003, 0.01, 0.03, 0.1, 0.3, 1.0, 3.0, 10.0, 30.0, 100.0, 300.0, 1000.0
Return Float
Default 1.0
Menu BW > VBW/RBW
Example :BWIDth:VIDeo:RATio 30
3.5.4.6 Auto Video to Resolution Bandwidth Ratio State
([:SENSe]:BWIDth:VIDeo:RATio:CONg?)
Command
Format
[:SENSe]:BWIDth:VIDeo:RATio:CONfig?
Instruction This command turns on/off auto video to resolution bandwidth ratio.
Parameter
Type
None
Parameter
Range
None
Return 0|1
Default 1
Menu None
Example :BWIDth:VIDeo:RATio:CONfig?
3.5.4.7 Filter Type ([:SENSe]:FILTer:TYPE)
Command
Format
[:SENSe]:FILTer:TYPE EMI|GAUSS
[:SENSe]:FILTer:TYPE?
Instruction Sets filter type
Gets filter type
Parameter
Type
Enumeration
Parameter
Range
EMI|GAUSS
Return Enumeration
Default GAUSS
Menu BW > Filter Type
Example :FILTer:TYPE EMI
3.5.5 Trace Subsection
3.5.5.1 Trace mode (:TRACe[1]|2|3|4:MODE)
Command
Format
:TRACe[1]|2|3|4:MODE WRITe|MAXHold|MINHold|VIEW|BLANk|AVERage
:TRACe[1]|2|3|4:MODE?