Instructions

T3VNA Programming Guide 23
SPECtrogram: Spectrogram Monitor
TOI: Third-order Intercept Point
Return Enumeration
Default OFF
Menu Measure
Example :INSTrument:MEASure ACPR
3.4 Initiate Subsystem
3.4.1 Single Sweep (:INITiate[:IMMediate])
Command
Format
:INITiate[:IMMediate]
Instruction Sets single sweep.
Parameter
Type
None
Parameter
Range
None
Return None
Default None
Menu Sweep > Single
Example :INITiate:IMMediate
3.4.2 Continuous or Single Sweep
(:INITiate:CONTinuous)
Command
Format
:INITiate:CONTinuous OFF|ON|0|1
:INITiate:CONTinuous?
Instruction Sets continuous sweep mode on-off.
Gets continuous sweep mode state.
Parameter
Type
Boolean
Parameter
Range
OFF|ON|0|1
Return 0|1
Default ON
Menu Sweep > Sweep Mode
Example :INITiate:CONTinuous OFF
3.5 Sense Subsystem
3.5.1 Frequency Subsection
3.5.1.1 Center Frequency ([:SENSe]:FREQuency:CENTer)
Command
Format
[:SENSe]:FREQuency:CENTer <freq>
[:SENSe]:FREQuency:CENTer?
Instruction Sets the center frequency of the vector network analyzer.