Instructions

18 T3VNA Programming Guide
Parameter
Type
String
Parameter
Range
year(four digits), month(1~12), date(1~31)
Return String
Default None
Menu System > date&time
Example Sets System date:
:SYSTem:DATE 20050101
Gets System date:
:SYSTem:DATE?
3.2.3 IP Address
(:SYSTem:COMMunicate:LAN:IPADdress)
Command
Format
:SYSTem:COMMunicate:LAN:IPADdress <“xxx.xxx.xxx.xxx”>
:SYSTem:COMMunicate:LAN:CONFig:APPLy
:SYSTem:COMMunicate:LAN:IPADdress?
Instruction Sets a host name for the analyzer in network.
IP Address command will be eective after using this “APPLy” command.
Gets IP address.
Parameter
Type
String
Parameter
Range
Conform to the IP Sets standard(0-255:0-255:0-255:0-255)
Return IP address String
Default None
Menu System > Interface > LAN > IP Address
Example :SYSTem:COMMunicate:LAN:IPADdress “192.168.1.12”
:SYSTem:COMMunicate:LAN:IPADdress?
3.2.4 Gateway (:SYSTem:COMMunicate:LAN:GATeway)
Command
Format
:SYSTem:COMMunicate:LAN:GATeway <“xxx.xxx.xxx.xxx”>
:SYSTem:COMMunicate:LAN:CONFig:APPLy
:SYSTem:COMMunicate:LAN:GATeway?
Instruction Sets the gateway for the analyzer in the network. The gateway will be fetched
automatically if the IP assignment is set to DHCP.
Gateway command will be effective after using this “APPLy” command.
Gets gateway.
Parameter
Type
String
Parameter
Range
Conform to the IP standard (0-255:0-255:0-255:0-255)
Return Gateway string.
Default None
Menu System > Interface > LAN > Gateway
Example :SYSTem:COMMunicate:LAN:GATeway “192.168.1.1”
:SYSTem:COMMunicate:LAN:GATeway?
3.2.5 Subnet Mask
(:SYSTem:COMMunicate:LAN:SMASk)
Command :SYSTem:COMMunicate:LAN:SMASk <“xxx.xxx.xxx.xxx”>