Instructions

14 T3VNA Programming Guide
6.Discrete
The parameter could only be one of the specified values and these values are discontinuous. For
example:
[:SENSe]:BWIDth:VIDeo:RATio <number>
The parameter <number> could only be one of 0.001, 0.003, 0.01, 0.03, 0.1, 0.3, 1.0, 3.0, 10.0,
30.0, 100.0, 300.0, 1000.0.
2.4 Command Abbreviation
The commands are not case sensitive, so you can use any of them. But if abbreviation
is used, all the capital letters in the command must be written completely. For example:
:DISPlay:WINDow:TRACe:Y:DLINe:STATe?
Can be abbreviated to:
:DISP:WIND:TRAC:Y:DLIN:STAT?